Multi Function Cable Tracker & Tester NF308

Feature Multi Function Cable Tracker & Tester NF308 :

• One person enough to complete cable continuity check.
• Directly hunt 5E, 6E, telephone wire, coaxial cable, USB cable and other cables.
• Check wiring error in 5E, 6E, telephone line, coaxial cable, USB cable and such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference.
• Locate the wiring or connection error.
• Measure cable length and determine the distance of open circuit and short circuit.
• Dynamically calibrate cable length and make length measurement as accurate as 97% .
• Simple and easy use. Big screen to display test result clear.
• Portable unit with long battery life ( wait-case 50 hours) .
• Automatically time-delay shut off and backlight display function.
• Measure length and pair with or without far-end recognizer.
• Locate cable and there are 8 far-end passive test jacks ( ID No.ID1-ID 8) .
• Far-end recognizer with prompting voice.
• Self-checking function and automatically compensate any change in battery capacity or ambient temperature.
• Single board computer software watchdog design and reliable operation.

Specifications Multi Function Cable Tracker & Tester NF308 :

1. Overall dimension: Main tester: 185× 105× 50mm; receiver: 218× 46× 29mm; Remote identifier: 84× 34× 27mm.
2. Power: Two laminated batteries of 9V.
3. Display: Special 4 x 16 character big screen LCD lattice ( valid visual field 61.6 x 25.2 mm) .
4. Type of cable tested: STP/ UTP twin twisted cable, coaxial cable, telephone line.
5. Type of cable detected: 5E, 6E, telephone wire, coaxial cable, USB cable and other metal wires.
6. Ambient temperature in work: -10º C~ + 60º C
7. Tester Port: Tester RJ45 master port ( M) , tester LOOPBACK RJ45 port ( L) , hunting RJ45 port ( With RJ45) ; Remote identifier RJ45 port ( R) . The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line.
8. Length Measurement of Twin Twisted Cable: Scope: 1~ 350 M ( 3 ~ 200 ft) ; Calibration accuracy: 3% ( + / - 0.5M or + / - 1.5 ft) ( calibrating cable > 5M) , Shipment accuracy: 5% ( + / - 0.5 M or + / - 1.5 ft) . ( AMP, AT& T Class 5 cable) , Display: M or ft.
9. Length Calibration: User can set calibration factor by himself with a given length cable. The length of calibrating cable is more than 5M.
10. Wire Sequence and Locating Cable Error: Check errors such as open circuit, short circuit, reverse connection, cross-over or cross-talk interference.
11. Locating Cable: 8 Remote identifier test jacks ( ID 1eID 8) .
12. Automatic Time-delay Shut Off Time: The tester does not operate for 30 minutes.
13. Packing: 30PCS/ CTN, CTN SIZE: 49* 45* 46CM, G.W: 22.0KGS

Untuk harga Multi Function Cable Tracker & Tester NF308, silahkan hubungi kami ...
alat tester kabel